CarTeck Drive Options

CarTeck Drive 500 600

The integrated drive and control unit of the CarTeck DRIVE 500 and 600 fits discreetly above the door. 

CarTeck Automatic makes so much sense. The fixed chain drive of the CarTeck Drive range is quieter and renowned for long-term reliability compared to revolving chain or belt designs.

Both the DRIVE 500 and the 600 can lift any size door. The 600 is available with all the option packs and the 500 is available with selected options (see below).

Power Transmitters Speed Lighting Options
Drive 500 500Nm 2 X Pearl Twin 180mm/sec 1 x 3 LED Motor Light Selected
Drive 600 600Nm 2 X Pearl 240mm/sec 1 x 6 LED Motor Light All

CarTeck Drive Pro 500 600

The separate control unit of the CarTeck DRIVE PRO 500 and  600 allows for flexible installation at a location close to available power sockets.

Both the DRIVE PRO 500 and the 600 can lift any size door. The 600 is available with all the option packs and the 500 is available with selected options.

Power Transmitters Speed Lighting Options
Drive Pro 500 500Nm 2 X Pearl Twin 180mm/sec 1 x 3 LED Motor Light Selected
Drive Pro 600 600Nm 2 X Pearl 240mm/sec 1 x 6 LED Motor Light All

Flexible Installation Options

The CarTeck Drive Pro 500 and 600 can be mounted in 3 different locations; ensuring the perfect installation can be made.

CarTeck Drive Pro 500 or 600 rear mounted control
CarTeck Drive Pro 500 600 rear mounted control
CarTeck Drive Pro 500 or 600 ceiling mounted control
CarTeck Drive Pro 500 600 ceiling mounted control
CarTeck Drive Pro 500 or 600 low-level front mounted control
CarTeck Drive Pro 500 600 low-level front mounted control

Pearl Twin Remote

The Pearl Twin transmitter has twin buttons that can be configured for two functions such as open and close and turn on the light.


Pearl Remote

The Pearl transmitter has four buttons that can be configured to suit your requirements – open and close, turn on the light, operate a second door and so on.


Extend the functionality of CarTeck Automatic with these function packs

Our function packs place you in control. Clever technology takes the guess work out of parking, keeps your garage dry, lights your way and keeps you moving even if power fails.

Parking Packs

A laser sensor to guide you to the perfect parking point combines with a humidity sensor. If you drive your car in wet and the humidity in the garage rises, the sensor automatically opens the door a short distance to allow fresh air in, helping prevent mould forming. When humidity levels drop, the sensor automatically closes the door.

Parking Pack 1
Parking Pack 2

Ambience Pack 1

Need more light? Extra lighting strips for the control units can be combined with the motion sensor to switch on automatically as you enter. No more crashing about in the dark!


Ambience Pack 2

Add a relay to allow control of other garage or garden lighting for even more flexibility.


Ambience Pack 3

These clever LED strips are easily positioned on the underside of the door tracks with magnetic tape. They flood the garage with 6000 lumens of light (equivalent to around 400 watts of incandescent light!) Four linked LED strips are activated by the kits’ motion sensor or infra red remote control.


Security Pack 1

A magnetic motor lock that mechanically locks the motor in any position (even with ventilation function) up to an attack force of 300 kg, increasing the existing security. 

The alarm buzzer recognises a break-in attempt and outputs a loud signal tone. The warning buzzer outputs an acoustic signal as the door closes.


Security Pack 2

A relay that allows control of other garage or garden / security lighting.

The alarm buzzer recognises a break-in attempt and outputs a loud signal tone. The warning buzzer outputs an acoustic signal as the door closes.


Smart Pack

The Output module transfers the door status (open/
closed) allowing you to integrate your garage door
into Smart Home systems.


Safety Pack

Add non-contact obstruction detection with Photoeye that
uses an infra-red light beam across the opening to stop the door when the beam is broken.

Access Pack 1

If you don’t want to carry a transmitter you can operate
your door from a wall mounted outdoor keypad.
It’s the perfect solution if you’re out cycling or for
family members that use the door occasionally.

Access Pack 2

For extra convenience you can control your door and
check its position from within your home with a
two function wall switch available in grey or white
finish. Similar in size to a standard single light switch.

Power Pack

A simple battery backup for power failure operation. The
battery module assumes the power supply of the operator
for up to 5 door cycles.

The Pearl Vibe

The Pearl Vibe transmitter option vibrates in your hand confirming that the control unit has received your command. It can also confirm if your door is open or closed using bidirectional communication between
the opener and transmitter.