Bullet-Proof Steel Door dw64-1 "Teckentrup BP"

  • Class FB 4, tested in accordance with DIN EN 1522 corresponds to Class M3 in accordance with German performance requirements

The bullet-proof Teckentrup steel door prevents bullets from travelling through it. Its application areas include, e.g., safe rooms in airports and train stations, police stations, banks, court buildings, police cells in large arenas, but also private buildings which demand a high-level of security.

Bullet-proof steel door dw64-1 “Teckentrup BP”
Tested in accordance with DIN EN 1522, Class FB 4

Width: 750 – 1500 mm
Height: 1750 – 3000 mm

Door leaf

  • Double-skinned, rebated on 3 sides
  • Door leaf thickness 64 mm
  • Sheet thickness 1.5 mm


  • Corner frame 2.0 mm thick, galvanized with 3-sided seal and bottom sill. 
  • Frame fixed with 3 screws on each side

Door leaf/Frame galvanized and prime coated similar to RAL 9002 (grey white)

In accordance with DIN EN 1063-BR 4

Bullet-proof protection
The solid, 64 mm thick door leaf is equipped with special armoured protection and is classified as Class FB 4 for handguns, e.g. “44 Magnum”. This corresponds to Class M3 in accordance with German Performance Require-ments. The door can also be fitted with glazing (in accordance with DIN EN 1063 – BR 4). The test also specifies that the door is shatter-proof, i.e. prevents fragments and secondary projectiles from entering a room.

Beschusshemmende Stahltür dw 64-1 -Teckentrup BP- Klasse FB4 (entspricht Klasse M3 nach den Prüfbedingungen LKA-BW)