Extended: transparent, highly insulating industrial doors

With quadruple glazing and 80 millimetre insulating core, Teckentrup is further extending its range of highly insulating industrial sectional doors. At BAU (hall B3, stand 321), the structural element manufacturer is presenting its two new door types "SL 80" and "SLW 80" which, thanks to the high proportion of glass, permit viewing into and out of the hall, allow daylight into the interior and keep heat inside due to their new construction.

Energy saving – this trend has been persisting for years, and is likely to intensify in the future. No wonder, then, that energy and resources efficiency will also be a central theme at BAU 2015. In this segment, Teckentrup is further extending its range of heat-insulating doors: The technology of the industrial sectional door with 80 millimetre thick panels that have long proven themselves in the SW 80 "insulating door" has been transferred to the "SL" and "SLW" types. This means that very transparent doors are now available with improved thermal insulation ("SL 80" and "SLW 80").

Here, the transparent door part is formed by a thermally-separated aluminium construction that is filled with triple – or optionally even quadruple – acrylic glazing. The SL 80 door type is fully glazed, and in the case of the SLW 80 door type the base section – optionally also the second section – is formed from 80 millimetre thick polyurethane-filled panels. Depending on the requirements profile, this means that the optimum door can be configured. As with the "SW 80", improvement of the insulating value by up to 50 per cent is also possible with the new door types, depending on the door size.

The other characteristics and design options are retained. Suitable drives, robust door sections, durable surfaces in many colour tones and decors, robust floor seals, etc. All in all, a comprehensive range of sectional doors is now available in 40 or 80 millimetre thickness, where material, insulating value, transparency and surface can be selected in a modular manner to build up a door that is precisely in accordance with requirements.

Building with industrial doors
Transparence and aesthetics, thermal insulation and cost-effectiveness: With its thick panels and efficient insulating glazing, the SLW 80 industrial sectional door (Teckentrup) combines architectural and technical specifications.
Insulation cross-section
Thermal insulation on a new level: the thermally-separated aluminium construction is particularly efficient with quadruple acrylic glazing.

Further reading

Teckentrup Carteck Panel

Four sections all the way up to 2280mm high for CarTeck Insulated Sectional Garage Doors

22 Jul 2019

A well-proportioned door "just looks right" and an even panel configuration is what creates the right balance.

Read more

Teckentrup Headroom Kit Thumb

Gas meter in the way? Use the free 240mm headroom kit to lift CarTeck sectional garage door tracks up and over! It’s a free option – just ask!

16 Jul 2019

A gas meter, a pass door or some shelving can make for a difficult install… ….if only there was a way of raising up the tracks…

Read more

Teckentrup High Level Extension Springs Thumb

Compelling Arguments for High-Level Extension Springs…

11 Jul 2019

CarTeck extension springs are high up, out of reach of inquisitive fingers in covered trays. Safely out of harm’s way!

Read more