Finished in style

Each profile is available in a selection of finishes as shown in the grid below.

All of our sectional garage doors are supplied as standard in traffic white embossed wood grain on the outside (similar to RAL9016) and grey white embossed stucco on the inside (RAL9002).

RAL Colours

Something special in mind?

If the colour you require is not available as a Trend colour are able to co the colour we are able to coat our standard panels in any RAL colour.

Standard Ribbed, Centre Ribbed and Solid Profile

White Trend/RAL
White Trend/RAL
White Trend/RAL
White Trend/RAL
Micro Profile
Night Oak
Smooth Wood Effect
Smooth Wood Effect
Golden Oak
Smooth Wood Effect
Smooth Wood Effect

Trend Colours

Flame Red
Fir Green
Moss Green
Sepia Brown
Window Grey
Anthracite Grey
White Aluminium
Quartz Grey
Light Grey
Grey Aluminium
Jet Black
Steel Blue
Umbra Grey
Slate Grey
RAL 7015
TT 703
Satin metallic effect - grey with micaceous iron ore particles.
Anthracite Textured
Ice Crystal
Grey Aluminium
TT9016 Bling White
with micaceous iron ore particles glitter effect.

A note about colour:

Direct Sunlight
Where doors are exposed to direct sunlight, dark colours should be avoided. 

RAL References
RAL references for colours are provided as a guide only to the nearest similar RAL colour. Colours will not match to other RAL finishes due to different coating processes, gloss levels, substrates and textures. Similarly, special RAL, BS, wood effects or other colours will not be a precise match.

Colour Accuracy
Colours shown are limited in accuracy by the viewing screen - samples should always be requested.

Frame Legs, Headers & 3D Profiles
Frame legs are galvanised finish only.

Colour Matching To Other Finishes
If you are matching to other finishes such as window frames, always request a sample, particularly for wood effects such as rosewood, golden oak, night oak or Winchester.

Keeping your door looking good and properly maintained:

Cleaning On Installation
After the installation has been completed, clean and dry the door thoroughly inside and out with warm soapy water to remove any grease, dust and metal fragments from the door (these will discolour the door finish if left on the door).

The door should be washed with a car shampoo or similar, every two months, to prevent the build up of dirt, salt, grit and other corrosive substances.

If the door is in an area prone to coastal corrosion from airborne salts, the door should be cleaned monthly.

Furthermore, cleaning lifting gear with a cloth soaked in a light oil will help to protect your door from corrosion – it must be accepted that salt air is very aggressive and extra care is required.

No caustic, abrasive or corrosive chemicals and substances, flood water, water runoff, or runoff from lead, copper or galvanic metal flashing should be allowed to come into contact with the door.

Ash, cement, dust, animal waste, or foreign substances should be removed immediately. Failure to ensure the door is cleaned and maintained as described will invalidate the doors’ warranty.

Doors must be maintained as per the supplied Installation, Operating and Maintenance Manual by a Garage Door Specialist.

Failure to carry out the required maintenance at the advised interval will invalidate the warranty.