Episode 88
Watch the full length cut of an installation of a Teckentrup CarTeck Side Hinged Garage Door step by step, start to finish.
Watch video
Episode 106
If alignment of the leaves cannot be achieved through manipulating the frame, you can adjust the doors' concealed hinges. To see how it's done in all three planes of the door, watch this step-by-step video guide.
Watch videoFind an episode by keyword search:
Episode 105
If alignment of the leaves cannot be achieved through manipulating the frame, you can adjust the doors' surface mounted hinges. To see how it's done in all three planes of the door, watch this step-by-step video guide.
Watch video
Episode 104
Not every garage floor is even and this might mean you need to fix the threshold. In this video, Dan talks you through how this can be done.
Watch video
Episode 103
In this video, Dan talks you through the doors labels telling you where the different labels are, what they are for and why they are important.
Watch video
Episode 102
The most important step, cleaning your installed door. Watch this video from Dan to see why it's so crucial.
Watch video
Episode 101
Watch Dan install the door stay and grommets to finish the installation.
Watch video
Episode 100
Worried about blowing a brick? Teckentrup has a brilliant solution. Watch the video from Dan to see how this can be avoided.
Watch video
Episode 99
To get the perfect seal and eliminate play, adjusting the strike plate and keeps may be required. In this video, Dan shows you exactly how it's done.
Watch video
Episode 98
Flush bolts not engaging? Teckentrup have made adjusting the flush bolt plate simple. Here's Dan showing you how.
Watch video
Episode 97
In this video, Dan takes you through fixing the frame. No plugs are needed, just drive straight in!
Watch video
Episode 96
Watch how to check your door to make sure the door leaf edges are aligned and how to adjust them if needed.
Watch video
Episode 95
Watch step-by-step instructions from Dan on how to adjust the jacking bolts and level the frame on a Tekcentrup side hinged garage door. This step requires the use of wind bags to keep the door securely in place.
Watch video
Episode 94
Fitting the 3 part threshold is easy. Watch this quick video from Dan to see exactly how it's installed.
Watch video
Episode 93
Loosening the door jacking bolts before fitting the door in the opening makes using the allen key to adjust the bolts later on much easier. Here's Dan showing you how it's done.
Watch video
Episode 92
Next, it's time to prepare the door for installation by removing the threshold and lifting straps. Watch this video from Dan to see how quick and easy it's done.
Watch video
Episode 91
Stainless steel pull handles are fitted for you in the factory, but lever handles must be installed on site. Watch this video to see Dan take you through how to fit the exterior and interior lever handle.
Watch video
Episode 90
Watch Dan give you a run down of everything that's included in the fixing pack box delivered with your Teckentrup side hinged garage door.
Watch video
Episode 89
A video of all the important things you need to start installing a Teckentrup CarTeck Side Hinged Garage Door.
Watch video