31 Oct 2023
If alignment of the leaves cannot be achieved through manipulating the frame, you can adjust the doors' surface mounted hinges. To see how it's done in all three planes of the door, watch this step-by-step video guide.
31 Oct 2023
Not every garage floor is even and this might mean you need to fix the threshold. In this video, Dan talks you through how this can be done.
31 Oct 2023
In this video, Dan talks you through the doors labels telling you where the different labels are, what they are for and why they are important.
31 Oct 2023
The most important step, cleaning your installed door. Watch this video from Dan to see why it's so crucial.
30 Oct 2023
Watch Dan install the door stay and grommets to finish the installation.
30 Oct 2023
Worried about blowing a brick? Teckentrup has a brilliant solution. Watch the video from Dan to see how this can be avoided.
30 Oct 2023
To get the perfect seal and eliminate play, adjusting the strike plate and keeps may be required. In this video, Dan shows you exactly how it's done.
30 Oct 2023
Flush bolts not engaging? Teckentrup have made adjusting the flush bolt plate simple. Here's Dan showing you how.
30 Oct 2023
In this video, Dan takes you through fixing the frame. No plugs are needed, just drive straight in!
30 Oct 2023
Watch how to check your door to make sure the door leaf edges are aligned and how to adjust them if needed.
30 Oct 2023
Watch step-by-step instructions from Dan on how to adjust the jacking bolts and level the frame on a Tekcentrup side hinged garage door. This step requires the use of wind bags to keep the door securely in place.
30 Oct 2023
Fitting the 3 part threshold is easy. Watch this quick video from Dan to see exactly how it's installed.
Page 6 of 24