650 doors installed in just 18 months

From folding door to transformer door: Doors from just one source

Zellstoff Stendal GmbH in eastern Germany is Europe-s most advanced and largest pulp mill. At full capacity the facility can produce up to approx. 570,000 metric tons of high-quality pulp each year. This pulp is subsequently used to produce printing and sanitary paper. At full output the plant requires approx. 9000 solid cubic metres of timber a day. This raw material is delivered daily by more than 500 lorries from areas in eastern and southern Germany within a radius of approx. 300 kilometresBesides road and rail access to the plant, the River Elbe offers a third channel of supply.

Teckentrup completely satisfied all the demands from development to production with its expertise and years of experience. Teckentrup multi-purpose doors, security doors, transformer doors and emergency exit doors were installed at the complex site. Special Teckentrup roller shutters and sliding, sectional and folding doors secure entrances and exits during tough, rigorous daily operations. Very rarely is a door -off-the-shelf-. A sophisticated concept was required for this industrial plant with its highly complex infrastructure.

Approximately 600 doors, 40 roller shutters and 19 folding doors as well as sectional and sliding doors carry out various tasks in the complicated infrastructure and support trouble-free operation. All the doors were individually adapted to each component according to the various installation and material situations, such as sand-lime brickwork, reinforced concrete or trapezoidal sheet metal. Special solutions in almost every shape and size with various functions, incl. fire and smoke protection or special stability, were realized. The optical appearance of the doors was carried out on the basis of a clear creative design which reflected the corporate design of the company. With just a few exceptions, all the doors at the building site were painted with RAL 1006. Furthermore, all the doors were fitted with typical windows, kick plates and identical door latches. The doors were also equipped as standard with a weather board which protects them against driving rain.

Stendal1 14
Stendal2 03 Af4A878Db0
Stendal3 14
Stendal7 14
Stendal8 14
Stendal9 14
Stendal1 14
Stendal2 03 Af4A878Db0
Stendal3 14
Stendal7 14
Stendal8 14
Stendal9 14

Further reading

Teckentrup Carteck Panel

Four sections all the way up to 2280mm high for CarTeck Insulated Sectional Garage Doors

22 Jul 2019

A well-proportioned door "just looks right" and an even panel configuration is what creates the right balance.

Read more

Teckentrup Headroom Kit Thumb

Gas meter in the way? Use the free 240mm headroom kit to lift CarTeck sectional garage door tracks up and over! It’s a free option – just ask!

16 Jul 2019

A gas meter, a pass door or some shelving can make for a difficult install… ….if only there was a way of raising up the tracks…

Read more

Teckentrup High Level Extension Springs Thumb

Compelling Arguments for High-Level Extension Springs…

11 Jul 2019

CarTeck extension springs are high up, out of reach of inquisitive fingers in covered trays. Safely out of harm’s way!

Read more