The CarTeck Automated range of sectional garage personnel doors come in a choice of 4 styles, each with their own design appeal. All of the designs shown are available with any combination of finish (excluding Georgian panel) and colour.
A finish for every application...
The CarTeck Solid, Centre Ribbed and Standard Ribbed styles comes in a range of 4 textures, which can be combined with any colour combination:
The CarTeck Georgian style comes in woodgrain texture, which can be combined with any colour combination:
For a panoramic presence look no further than the CarTeck SLX Vision sectional garage door. The doors employ the same market-leading sectional garage door lifting gear used on the standard CarTeck range with its concealed lifting springs, but with added wow-factor.
Learn more
Multiple mullions give the CarTeck GSA Vision sectional garage door an ultra-contemporary, minimalist aesthetic. Choose privacy and light with satin or frosted glazing or vision and light with clear or tinted glazing.
Learn more
Each profile is available in a selection of finishes as shown in the grid below.
All of our sectional garage doors are supplied as standard in traffic white embossed wood grain on the outside (similar to RAL9016) and grey white embossed stucco on the inside (RAL9002).
If the colour you require is not available as a Trend colour are able to co the colour we are able to coat our standard panels in any RAL colour.
Our wood effect doors definitely look the part - characterful woodgraining brings these designs to life.
Our wide grain wood effect finishes are grained to give a much more natural look than close grain finishes.
For colour matching to other finishes such as window frames, always request a sample. Although wood effects complement existing uPVC windows, they do not match precisely.
These woodgrains are a paint finished surface instead of the traditional surface bonded film. They outperform films for scratch resistance. The paint finish is also more UV stable over time, retaining colour for longer and less prone to the finish becoming “milky” in strong sunlight.
Direct Sunlight
Where doors are exposed to direct sunlight, dark colours should be avoided.
RAL References
RAL references for colours are provided as a guide only to the nearest similar RAL colour. Colours will not match to other RAL finishes due to different coating processes, gloss levels, substrates and textures. Similarly, special RAL, BS, wood effects or other colours will not be a precise match.
Colour Accuracy
Colours shown are limited in accuracy by the viewing screen - samples should always be requested.
Wood Design
Wood Design frame legs, headers & 3D profiles in Night Oak & Rosewood are finished in a complimenting painted wood effect finish but will not match precisely. Golden Oak & Winchester are finished in a flat colour RAL 8014.
Frame Legs, Headers & 3D Profiles
All frame legs, headers & 3D profiles are available in smooth finish only. TT9016 Bling White frame legs, headers & 3D profiles are finished in RAL 9016.
Colour Matching To Other Finishes
If you are matching to other finishes such as window frames, always request a sample, particularly for wood effects such as rosewood, golden oak, night oak or Winchester.
Cleaning On Installation
After the installation has been completed, clean and dry the door thoroughly inside and out with warm soapy water to remove any grease, dust and metal fragments from the door (these will discolour the door finish if left on the door).
Cleaning
The door should be washed with a car shampoo or similar, every two months, to prevent the build up of dirt, salt, grit and other corrosive substances.
If the door is in an area prone to coastal corrosion from airborne salts, the door should be cleaned monthly.
Furthermore, cleaning lifting gear with a cloth soaked in a light oil will help to protect your door from corrosion – it must be accepted that salt air is very aggressive and extra care is required.
No caustic, abrasive or corrosive chemicals and substances, flood water, water runoff, or runoff from lead, copper or galvanic metal flashing should be allowed to come into contact with the door.
Ash, cement, dust, animal waste, or foreign substances should be removed immediately. Failure to ensure the door is cleaned and maintained as described will invalidate the doors’ warranty.
Maintenance
Doors must be maintained as per the supplied Installation, Operating and Maintenance Manual by a Garage Door Specialist.
Failure to carry out the required maintenance at the advised interval will invalidate the warranty.
1 Thanks to a high-quality steel core and durable multiple coating, our sectional door panels withstand the toughest conditions.
Learn more
2 Garages can be dust blown, cold, draughty and damp places. CarTeck Automatic is designed to bring your garage back into your home.
Learn more
3 Vertical opening means CarTeck Automatic fits all shapes of garage opening and allows you to park right up to the door.
Learn more
4 The integrated drive and control unit of the CarTeck DRIVE 500 and 600 fits discreetly above the door.
Learn more
5 Whether you’re renovating or building anew - Teckentrup sectional garage doors fit perfectly into every installation situation.
Learn more
6 Safe operation of CarTeck Automatic is the overriding priority of every design decision we make.
Learn more
